Of course, you could find a window covering store to repair the shades, or you can restring the blinds yourself. As it turns out, this is a pretty low-cost repair should you attempt this yourself. But don't be afraid. I put together this video to show you that this is certainly something you can do yourself. Just be sure to check the string configuration before you disassemble your shades, and just take your time.
Before you start here's what you'll need
2. A flat head screw driver (to remove the plastic end caps)
3. Scissors (to cut the string)
4. Thin gauge wire or large fabric needle (for feeding the string through the blinds)
The diagram below (from fixmyblinds.com) illustrates the typical 4 string configuration that you'll probably find in your typical day/night shade.
When I took apart the wide upper bunk window shade, however, I discovered that the configuration was a little different from the standard size window I did first. On the wider window, there were two springs (one per side) and the 4 string threading was different. So be sure to inspect the string configuration to make sure you reassemble it correctly.
 |
| Standard Window (after) |
 |
| Bunk Window (after) |
Good luck!
